Heidenhain SHB Data Interfaces for HEIDENHAIN Manuel d'utilisateur télécharger pdf (Page 56)

April 2010 6 – 57

6.6.2 Description of the machine parameters of TNC 406/407/415

Machine parameters

The following list contains the machine parameters for all software variants.

Since however, several machine parameters are only valid for a certain software or have been

introduced or eliminated as of a certain software version, there are columns with symbols for

differentiation.

Meaning of the symbols

 = The machine parameter or entry value applies for all software versions of this control.

04 = The machine parameter has been introduced with a certain software version

(e.g. with version 04).

I04 = The machine parameter is inactive.

- = The parameter does not exist on this control.

Explanation of the columns

A = TNC 407 with NC software 243 07* -- (without digitizing function)

B = TNC 415 with NC software 243 05* -- or 259 91* -- (without digitizing function)

C = TNC 407 with NC software 243 02* -- (with digitizing function)

D = TNC 415 with NC software 259 96* -- or 259 97* -- (with digitizing function)

E = TNC 407 with NC software 243 03* -- (software equivalent to TNC 415B/425)

F = TNC 407 with NC software 280 58* -- (special software)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 99 100

Pas de commentaire

Heidenhain SHB Data Interfaces for HEIDENHAIN Manuel d'utilisateur Page 56