Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes Manuel d'utilisateur Page 42

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 119
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 41
42
1.8 DIN PLUS (Y Axis): Positioning Commands
1.8 DIN PLUS (Y Axis): Positioning
Commands
Rapid traverse G0
G0 moves the tool at rapid traverse along the shortest path to the
target point X, Y, Z and tilts the B axis.
Approach tool change point G14
G14 moves the slide at rapid traverse to the tool change position. In
setup mode, define permanent coordinates for the tool change
position.
X
Z
Y
Z
Y
X
B
Parameters
X Diameter—target point
Z Length—target point
Y Length—target point
B Angle of the B axis
Programming X, Y, Z, B: Absolute, incremental or modal
Parameters
Q Sequence (default: 0)
0: Move simultaneously in X and Z axes (diagonal path)
1: First X, then Z direction
2: First Z, then X direction
3: Only X direction, Z remains unchanged
4: Only Z direction, X remains unchanged
5: Y direction only
6: Move simultaneously in X, Y and Z axes (diagonal path)
If Q=0 to 4, the Y axis does not move.
Vue de la page 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 118 119

Commentaires sur ces manuels

Pas de commentaire