Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes Manuel d'utilisateur Page 70
- Page / 119
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
70
1.13 TURN PLUS: Tool Magazine and B Axis
1.13 TURN PLUS: Tool Magazine and
B Axis
Tool magazine
TURN PLUS recognizes whether a turret is used as the tool carrier or
whether the tool carrier is loaded from a magazine. The tool selection
depends on the setting of machining parameter 2:
“Tools from turret” setting: TURN PLUS uses the tools entered in
the magazine list.
“Tools from database” setting: TURN PLUS looks for suitable tools
in the database.
“Combined” setting: TURN PLUS looks for suitable tools in both the
magazine list and the database.
When a tool magazine is inserted, the tools that are used are listed in
the PLATE MAGZN. section when TURN PLUS generates the NC
program. TURN PLUS also automatically generates G714 for the tool
change.
Tools for the B axis
By tilting the B axis and rotating the tool you can bring it into positions
that enable you to use one and the same tool to machine in the
longitudinal and transverse (or radial and axial) directions on the main
and opposing spindles. TURN PLUS supports this flexible use of tools
in the IWG.
After you have selected the tool, the IWG opens the “Tool position”
dialog box. You can now specify the position of the tool for the next
machining operation to be performed.
C=0° C=180°
0°
B
O=
13
75
2
4
6
8
C
BO
T
M
Parameters
O Orientation of turning tools. Position of the tool's cutting edge
(see figure).
Tool positions 1, 3, 5, 7: For roughing, finishing and button
tools (neutral tools are recognized by the tool angle).
Tool positions 2, 4, 6, 8: For recessing and threading cycles
(a “right-hand” or “left-hand” tool is defined in the tool
data).
B B axis angle. Angle to which the B axis is tilted.
C Offset position angle of turning tools.
0°: Tool attitude “normal”
180°: Tool attitude “upside down”
- CNC PILOT 4290 1
- B and Y Axis 1
- CNC PILOT 4290 B and Y Axis 2
- 1 B and Y Axis ..... 7 3
- 1.1 Basics 10
- Magazine list 11
- P . . 13
- ID . . 13
- Working with magazine tools 14
- 0°: Tool attitude “normal” 15
- 1.3 Programming Notes 20
- 1.4 DIN PLUS: Section Codes 22
- Linear element G171 Geo 24
- Circular arc G172/G173 Geo 25
- Hole G370 Geo 26
- Linear slot G371 Geo 26
- Circular slot G372/G373 Geo 27
- Full circle G374 Geo 27
- Rectangle G375 Geo 28
- Eccentric polygon G377 Geo 28
- Single surface G376 Geo 31
- Centric polygon G477 Geo 31
- Linear element G181 Geo 32
- Circular arc G182/G183 Geo 33
- Hole G380 Geo 34
- Linear slot G381 Geo 34
- Circular slot G382/G383 Geo 35
- Full circle G384 Geo 35
- Rectangle G385 Geo 36
- Eccentric polygon G387 Geo 36
- Single surface G386 Geo 39
- Centric polygon G487 Geo 39
- 1.7 DIN PLUS: Working Planes 40
- Commands 42
- 1.9 DIN PLUS: Magazine Tools 44
- Milling: Linear movement G1 49
- Area milling—roughing G841 52
- Area milling—finishing G842 53
- Engrave in XY plane G803 63
- Engrave in YZ plane G804 64
- Hobbing G808 67
- 1.12 Simulation 68
- Tool magazine 70
- Tools for the B axis 70
- 1.14 TURN PLUS: Y Axis 71
- 1.15 TURN PLUS: XY Plane 73
- Contours 73
- XY plane: Linear element 75
- XY plane: Arc 76
- XY plane: Single hole 77
- XY plane: Rectangle 80
- XY plane: Polygon 81
- XY plane: Linear slot 82
- XY plane: Circular slot 83
- XY plane: Single surface 88
- XY plane: Centric polygon 88
- YZ plane: Linear element 90
- YZ plane: Arc 91
- YZ plane: Single hole 92
- YZ plane: Rectangle 95
- YZ plane: Polygon 96
- YZ plane: Linear slot 97
- YZ plane: Circular slot 98
- Single surface in YZ plane 103
- Centric polygons in YZ plane 103
- 1.17 Example Programs 104
- 119
Produits connexes et manuels pour Équipement Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes
Équipement Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes Manuel d'utilisateur
(117 pages)
(117 pages)
(755 pages)
Équipement Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes Manuel d'utilisateur
(119 pages)
(119 pages)
Équipement Heidenhain CNC Pilot 4290 V7.1 Description of B and Y axes Manuel d'utilisateur
(119 pages)
(119 pages)
(294 pages)
(481 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.563 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels